HP LaserJet 9000, HP 9040 service error, 9050 error codes

HP LaserJet 9000/9040/9050 13 Paper Jam | 49 Error, 49.4c02 Firmware Error | 50.01, 50.02 Fuser Error | 51.1 Beam Detect Error | 52 Laser Scanner Error | 57 Fan Failure | 59 Main Motor Rotation Error!

We stock HP 9000, 9040, 9050 printer repair parts to solve ALL service error code failures!

We specialize on LaserJet 9000, 9040 and 9050 numerical error code with 13.1, 13.3, 13.5, 13.6 paper jams, 49.4c02 firmware error, 50.1, 50.2, 50.3 fuser error, 51.1 beam detect error, 52 laser scanner error, 57.1, 5.2, 57.3, 57.4, 57.5, 57.6, 57.7 fan failure and 59.1, 59.2, 59.3, 59.4, 59.5, 59.6, 59.7 main motor rotation error as well as 60.2, 60.3, 60.4 lifter motor error. LaserJet 9040/9050 printer error code failure indicates the part has failed during a printer usage.

We provide HP LaserJet 9000/9040/9050 printer error code repairs in Los Angeles and Orange County with image defects, vertical lines, horizontal lines, repeating dots, toner not bonding to paper, dity prints, image defects, grinding noise, error messages, error codes, maintenance errors. We provide fast onsite Laser Jet 9040/9050 printer maintenance service in Southern California.

We stock HP LaserJet 9000, 9040 and 9050 power supply fan, fuser fan, delivery fan, cartridge fan, Fuser Unit, Maintenance Kit, Roller Kits, paper cassette trays, Registration Assembly, Pickup assembly and HP 9000, 9040 and 9050 Duplex unit. Our technicians have the ability to repair HP Laser-Jet 9040/9050 printers on the first visit.

LaserJet 9000/9040/9050 Printer Numerical Service Error Codes!

We fix Hewlett Packard 9000, 9040 and 9050 printer error code repair!

• Error code 13.01.00 a page is jammed in the paper path at the tray 1 feed area. HP 9000 13.01.00 A page is jammed in the paper path at tray X feed area.
• Tray 2: The media did not reach the tray 2 feed sensor (PS1402) within the specified time. Tray 3: The media did not reach the tray 3 feed sensor (PS1404) within the specified time.
• Error code 13.03.00 a page is jammed in the paper path at the tray 1 feed area. The media did not reach the registration sensor (PS2) within the specified time. 13.03.00 a page is jammed in the paper path at tray X feed area. The media did not reach the registration sensor (PS2) within the specified time. LaserJet 9000 13.03.00 a page is jammed in the paper path at the feed area.
• 13.05.00 a page is jammed in the paper path at the fuser area. The leading edge of the media did not reach the fuser delivery sensor (PS502) within the specified time.
• 13.05.00 JAM INSIDE RIGHT DOOR
  13.05.00 a page is jammed in the paper path at the fuser area. The leading edge of the media did not reach the fuser delivery sensor (PS502) within the specified time.
• 13.06.00 JAM INSIDE FRONT DOOR
  13.06.00 a page is jammed in the paper path at the fuser area.
• 13.06.00 JAM INSIDE LEFT DOOR
  13.06.00 a page is jammed in the paper path at the fuser area.
• Hewlett Packard LaserJet 9000/9040/9050 printer repair with error code 13.09.00 JAM INSIDE LEFT DOOR 13.09.00 a page is jammed in the paper path at the face-down bin. The leading edge of the media did not reach the face-down bin delivery sensor (PS1451) within the specified time.
• 13.0A.00 JAM INSIDE LEFT DOOR 13.0A.00 a page is jammed in the paper path. Access through the left door. The trailing edge of the media did not leave the face-down bin delivery sensor (PS1451) within the specified time.
• 13.0A.00 JAM IN TOP OUTPUT BIN 13.0A.00 a page is jammed in the paper path at the face-down bin. The trailing edge of the media did not leave the face-down bin delivery sensor (PS1451) within the specified time.
• 13.10.00 JAM INSIDE LEFT DOOR 13.10.00 a page is jammed in the paper path at the reversing area.
  The leading edge of the media did not reach the reversed paper sensor (PS2002) in the duplexer within the specified time.
• 13.11.00 JAM INSIDE LEFT DOOR 13.11.00 a page is jammed in the paper path at the reversing area.
  The trailing edge of the media did not leave the reversed paper sensor (PS2002) in the duplexer within the specified timing.
• Error code 13.11.05 JAM IN INPUT ACCESSORY 13.11.05 a page is jammed in the paper path at the registration area. A pickup delay jam has occurred.
• Error code 13.11.06 PICKUP STATIONARY JAM 13.11.06 A page is jammed in the pickup area of the input accessory.
• Error code 13.11.07 JAM IN INPUT ACCESSORY 13.11.07 a page is jammed in the right door area. A page stopped in the registration area.
• Error code13.11.08 JAM IN INPUT ACCESSORY13.11.08 a page is jammed in the paper path at the vertical transfer unit registration area. A paper-delivery delay jam occurred.
• Error code 13.11.09 JAM IN INPUT ACCESSORY 13.11.09 a page is jammed in the paper path at the right door area. A paper-delivery stationary jam occurred.
• Error code 13.11.10 RESIDUAL JAM IN DELIVERY AREA
  13.11.10 a page is jammed in the delivery area when the power is turned on or when the front door is closed.
• Error code13.11.0A JAM IN INPUT DEVICE
  13.11.0A a page is jammed in the input device when the power is turned on.
• Error code 13.12.00 JAM INSIDE DUPLEXER DOOR
  13.12.00 a page is jammed in the paper path at the duplexer. The leading edge of the media did not reach the duplexer paper sensor (PS2004) within the specified time.
• Error code 13.12.00 JAM INSIDE LEFT DOOR
  13.12.00 a page is jammed in the paper path at the duplexer. The leading edge of the media did not reach the duplexer paper sensor (PS2004) within the specified time.
• Error code 13.12.01 JAM IN LEFT ACCESSORY
  13.12.01 Media is present in the flipper when power is turned on. An auto-flush operation is not possible.
• Error code 13.12.02 JAM IN LEFT ACCESSORY
  13.12.02 Media never reached the flipper input area.
• Error code 13.12.03 JAM IN LEFT ACCESSORY
  13.12.03 Media is jammed in the flipper entry area.
• Error code 13.12.04 JAM IN LEFT ACCESSORY
  13.12.04 Media is jammed in the flipper internal area.
• Error code 13.12.10 JAM IN LEFT ACCESSORY
  13.12.0A Media was present in the paper path when power was turned on.
• E. Media never reached the FLAG EXIT sensor.
• Error code 13.12.12 JAM IN LEFT ACCESSORY
  13.12.0C Media stopped in the paper path.
• Error code 13.12.13 JAM IN LEFT ACCESSORY
  13.12.0D Media stopped in the paper path. Media jammed entering the accumulator or offset module.
• Error code 13.12.14 Media is present in the accumulator when the printer is turned on. Media is activating the exit sensor when the printer is turned on.
• Error code 13.12.20 JAM IN LEFT ACCESSORY
• Error code 13.12.21 JAM IN LEFT ACCESSORY
• Error code 13.12.22 JAM IN LEFT ACCESSORY
  13.12.16 The GW sensor never activated. Note – This jam might be a hardware malfunction if the failure persists consistently.
• Error code13.12.23 JAM IN LEFT ACCESSORY 13.12.17 Media is jammed in the accumulator exit area.
• Error code 13.12.24 JAM IN LEFT ACCESSORY
  13.12.18 the retainer sensor does not activate. Note – This jam might be a hardware malfunction if the error persists.
• Error code 13.12.30 JAM IN LEFT ACCESSORY
  13.12.1E the carriage hit the media. Media is jammed between the carriage and the stack of paper in the stapling area. The carriage motor does not detect movement; it should be finding the home position.
• Error 13.12.31 JAM IN LEFT ACCESSORY
  13.12.1F Media is jammed in the stapler unit.
• Error 13.12.40 JAM IN LEFT ACCESSORY
  13.12.28 Media is present in the offset module when power is turned on.
• Error 13.12.41 JAM IN LEFT ACCESSORY
  13.12.29 the offset module did not reach its target position. Note – This jam might be a hardware malfunction if the failure repeats five consecutive times.
• Error 13.12.42 JAM IN LEFT ACCESSORY
  13.12.2 a Media is jammed in the offset module exit area.13.13.00 JAM INSIDE LEFT DOOR
  13.13.00 a page is jammed in the paper path at the duplexer.
  The trailing edge of the media did not leave the duplexer paper sensor (PS2004) within a specified time.
• Error 13.20.00 JAM INSIDE FRONT DOOR
  13.20.00 a page is jammed in the paper path. Media is present in the printer. Note – Media is detected in the paper path when the printer is turned on, or media is detected after opening and closing any door:
  Registration sensor (PS2)
  Fusing-unit jam sensor (PS501)
  Fusing-unit delivery sensor (PS502)
  Tray 2 paper-feed sensor (PS1402)
  Tray 3 paper-feed sensor (PS1403)
  Face-down-bin delivery sensor (PS1451)
  The duplexer residual paper sensor (PS2005) detects media.
• Error 13.20.00 JAM INSIDE LEFT DOOR
  13.20.00 a page is jammed in the paper path. Media is present in the printer.
• Error 13.21.00 JAM INSIDE LEFT DOOR
  13.21.00 a door is open.
• Error 13.30.00 JAM IN TRAY X
  13.30.00 a page is jammed in the pickup area of tray X.
• Error 13.30.00 JAM INSIDE RIGHT DOOR
  13.30.00 a page is jammed in the pickup area of tray 1.
• Error 13.31.00 JAM INSIDE LEFT DOOR
  13.31.00 a page is jammed in the paper path at the fuser area.
  The leading edge of the media reached the fuser delivery sensor (PS502) within the specified time, but the trailing edge of the media did not reach the fuser-jam sensor (PS501) within the specified time.

• Error 13.32.00 JAM INSIDE RIGHT DOOR 13.32.00 a page is jammed in the paper path at the feed area. The media did not leave the registration sensor (PS2) within the specified time.
• LaserJet 9000/9040/9050 printer repair with error code 13.XX.YZ JAM INSIDE TOP OUTPUT BIN
  13.0A.00 a delivery stay jam has occurred, and the media did not clear PS1451 within the specified time.
• LaserJet 9000/9040/9050 printer repair with error code 13.XX.YZ JAM IN TRAY N
  13.01.00 or 13.01.00 or 13.30.00
  A tray 2 pickup jam has occurred (N = 2) (PS1402).
  A tray 3 pickup jam has occurred (N = 3) (PS1404).
  A tray 1 pickup jam has occurred (N = 1).
• LaserJet 9000/9040/9050 error code 13.XX.YZ JAM INSIDE FRONT DOOR 13.05.00 or 13.31.00
  A fuser delivery delay jam has occurred, and the media did not clear PS501 within the specified time.
  A fuser delivery delay jam has occurred, and the media did not clear PS502 within the specified time.

LaserJet 9000/9040/9050 printer repair with error code 13.XX.YZ JAM INSIDE LEFT DOOR
13.06.00 a fuser delivery stay jam has occurred, and the media did not clear PS501 within the specified time.

• LaserJet 9000/9040/9050 error code 13.XX.YZ JAM INSIDE LEFT DOOR
  13.09.00 a delivery delay jam has occurred, and the media did not clear PS1451 within the specified time.
• LaserJet 9000/9040/9050 error code 13.XX.YZ JAM INSIDE LEFT DOOR
  13.10.00 or 13.11.00
  A reversing delay jam has occurred.
  A reversing stay jam has occurred.
• LaserJet 9000/9040/9050 error code 13.XX.YZ JAM INSIDE DUPLEXER
  13.12.00 or 13.13.00
  A duplexing delay jam has occurred.
  A duplexer stay jam has occurre

• LaserJet 9000/9040/9050 error code 13.XX.YZ JAM INSIDE RIGHT DOOR
  13.32.00 a media stay jam has occurred in the paper path.
• LaserJet 9000/9040/9050 printer repair with error code 21 PAGE TOO COMPLEX
• LaserJet 9000/9040/9050 error code 22 The printer EIO card in slot X overflowed the I/O buffer during a busy state.
• LaserJet 9000/9040/9050 error code 40 BAD SERIAL TRANSMISSIONS
  40 A serial data error (parity, framing, or line overrun) occurred while data was being received.

• LaserJet 9000/9040/9050 40 EIO X BAD TRANSMISSION 40 A connection with the EIO card in slot X has been abnormally interrupted.
• LaserJet 9000/9040/9050 printer repair with error code 41.3 UNEXPECTED SIZE TRAY XX
  41.3 Tray XX is loaded with media that is longer or shorter in the feed direction than the size that is configured for the tray.
• • LaserJet 9000/9040/9050 printer repair with error code 41.5 UNEXPECTED TYPE TRAY XX
    41.5 Tray XX is loaded with a media type (transparencies, envelopes) that is different from what the tray is configured to use.41.X A printer error occurred, and X corresponds to the following issue:
    41.1 = Unknown misprint error
    41.2 = Beam detect error
    41.4 = No video sync
    Reseat connections to the laser/scanner and DC controller.
  • LaserJet 9000/9040/9050 printer repair with error code 49.X A critical firmware error occurred.  Update the firmware to the latest version.
  • HP LaserJet 9000, 9040 and 9050 printer repair with error code 50.X A fuser error occurred, and X corresponds to the following issue:
  • HP 9000, 9040 and 9050 printer error code 50.1 Low fuser temperature
  • Laser Jet 9000, 9040 and 9050 printer error code 50.2 Fuser warm up service
  • Laser-Jet 9000, 9040 and 9050 printer error code 50.3 High fuser temperature
  • LaserJet 9000, 9040 and 9050 printer error code 50.4 Faulty fuser
  • 9000, 9040 and 9050 printer error code 50.5 Inconsistent fuser
  • LaserJet 9000/9040/9050 printer error code 50.6 Faulty fuser
  • LaserJet 9000/9040/9050 printer repair with 51.X A printer error occurred, and X corresponds to the following issue:
    LaserJet 9000/9040/9050 printer repair with 51.1 Beam detect error
    LaserJet 9000/9040/9050 printer repair with 51.2 Laser error
  • LaserJet 9000, 9040 and 9050 printer repair with error code 52.X A printer error occurred, and X corresponds to the following issue:
    Laser-Jet 9000, HP 9040 & HP 9050 printer repair with 52.0 Scanner error
    Laser Jet 9000, 9040 and 9050 printer repair with 52.1 Scanner startup error
    LaserJet 9000, 9040 and 9050 printer repair with 52.2 Scanner rotation error
  • LaserJet 9000/9040/9050 printer repair with error code 53.XY.ZZ A DIMM error occurred, and X, Y and Z corresponds to the following issues:
    X = DIMM type
    53.0 ROM
    53.1 RAM
    Y = Device location
    53.00 On board RAM/ROM
    53.01 DIMM slot 1
    53.02 DIMM slot 2
    53.03 DIMM slot 3
    4 DIMM slots 4
    ZZ = Error number
    53.00.01 Unsupported memory
    53.01.02 Recognized memory
    53.03.03 Less than minimum memory
    53.04.04 Exceeds maximum memory slot.
  • LaserJet 9000/9040/9050 printer repair with error code 56.X A printer error occurred, and X corresponds to the following issue:
    LaserJet 9000/9040/9050 printer error code 56.1 Illegal input selection
    LaserJet 9000/9040/9050 printer error code 56.2 Duplexer was removed while power is on
  • Error 57.X A printer error occurred, and X corresponds to the following issue:
    LaserJet 9000/9040/9050 printer repair with 57.1 Cartridge fan error (fan #5)
    HP LaserJet 9000, 9040 and 9050 error code 57.2 (not used)
    Laser Jet 9000, 9040 and 9050 error code 57.3 Power-supply-fan error (fan #1)
    Laser-Jet 9000, 9040 and 9050 error 57.4 Formatter- (controller-) fan error (fan #2)
    LaserJet 9000, 9040 and 9050 printer error 57.5 Delivery-fan (front) error (fan #4)
    9000, 9040 and 9050 printer error code 57.6 Face-down tray error
    Laser Jet 9000, 9040 and 9050 error 57.7 Delivery-fan (back) error (fan #3)
    HP 9000, 9040 and 9050 error code 57.8 Duplexer-fan errorLaserJet 9000/9040/9050 printer repair with error code 58.X A printer error occurred.
    XX = 04 – 58.04 error (power supply)
    XX = 03 – 58.03 error (CPU)
  • HP LaserJet 9000/9040/9050 59.X A printer error occurred, and X corresponds to the following issue:
    Error 59.0 Main motor error
    Service error code 59.1 Main motor startup error
    Error cdoe 59.2 Main motor rotation error
  • HP LaserJet 9000, 9040 and 9050 error 59.X A printer error occurred, and X corresponds to the following issue:
    Error 59.3 Abnormal fuser motor start
    Error code 59.4 Fuser motor rotation error
  • LaserJet 9000/9040/9050 error code 60.X Tray X is lifting the media to the top of the tray for correct feeding, but something is preventing the lift process.
    Error 60.2 Error in tray 2
    Error code 60.3 Error in tray 3
  • LaserJet 9000/9040/9050 printer error code 62.X A printer error occurred, and X corresponds to the following issue:
    62.1 memory in DIMM slot 1
    62.2 memory in DIMM slot 2
    62.3 memory in DIMM slot 3
    62.4 memory in DIMM slot 4
  • LaserJet 9000/9040/9050 error code 64 A scan buffer error occurred. 1 Turn off the printer, and then turn the printer on to continue.
  • LaserJet 9000/9040/9050 error code 66.11.00 a failure in an external input device occurred . A lifting operation is not completed in the correct amount of time.
  • LaserJet 9000/9040/9050 error code 66.11.01 the paper path connection unit is not installed . Install the paper-path connection unit.
  • LaserJet 9000/9040/9050 error code 66.12.20 OUTPUT DEVICE FAILUREError code 66.12.14 the retainer sensor was not activated. The retainer DC motor, located in the accumulator, is damaged. The printer cannot finish a power-on sequence.
  • 66.12.21 The bearing bracket is damaged.
    The accumulator-wheel sensor is damaged. The printer cannot finish a power-on sequence.
  • Error code 66.12.40 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
  • Error code 66.12.28 the offset module did not reach the offset position. The printer firmware detected five consecutive jams.
  • LaserJet 9000/9040/9050 printer error code 66.12.60 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER

• 66.12.3C An EEPROM error occurred . The EEPROM on the controller PCA is damaged.
• 66.12.70 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
• 66.12.46 An EEPROM error occurred. The EEPROM on the controller PCA is damaged. Replace the output device controller PCA.
• 68.X The printer NVRAM or hard disk is failing to write . Printing can continue but there might be unexpected
  response because an error occurred in permanent storage.
• 68.0 one or more of the printer settings that were saved in the NVRAM or hard disk is invalid and is reset to the factory default. Printing can continue, but unexpected responses might occur because an error occurred in permanent storage. LaserJet 9000/9040/9050 printer repair with error code68.1 PERMANENT STORAGE FULL
  68.1The printer NVRAM or hard disk is full . Printing can continue, but unexpected responses might occur because an error occurred in permanent storage.
• LaserJet 9000/9040/9050 69.X A printer error occurred where X is detailed below.
  69.0 The duplex mechanism failed
  69.1 The duplex side-adjust failed
• LaserJet 9000/9040/9050 printer error code 79.XXXX A critical hardware error occurred.
• LaserJet 9000/9040/9050 printer error code 80.XXXX The EIO accessory card in slot X encountered a critical error.
• Error code 80.XXX EMBEDDED JETDIRECT ERROR
  LaserJet 9000/9040/9050 80 An embedded Jet direct error occurred.
• LaserJet 9000/9040/9050 error 81 A temporary error occurred while testing the printer.
• LaserJet 9000/9040/9050 error 99 A firmware flash-failure occurred. Resend the flash upgrade. Replace the flash DIMM.

HP LaserJet Printer Maintenance – Clearing the HP Printer Maintenance Count and Service Messages!

We replace original HP LaserJet printer maintenance kits and clear printer maintenance service message!

If the display panel on your HP LaserJet printer reads “PERFORM PRINTER MAINTENANCE” your HP LaserJet printer needs a maintenance kit, which includes a fuser unit and separation rollers. The maintenance kit message will only go away if you reset or clear the maintenance count. Once you reach 200,000 pages on HP LaserJet 4000/4050 and 4200 printers the error message appears and you need to reset the maintenance count to zero to make the message go away.

Clearing the Maintenance Count and Service Message on LaserJet 5si

How to reset printer maintenance count on HP LaserJet 5si

After you install the maintenance kit, you can clear the PERFORM USER MAINTENANCE message by going to the printers control panel Configuration Menu and setting the SERVICE MESSAGE = to OFF. Note: this message will only appear in the Configuration Menu if the PERFORM USER MAINTENANCE message appears. Reset the maintenance count on an HP LaserJet 4000, 4050, 4100, 5000

“The Short Cut Method”
1. Turn the printer off.
2. Hold down the Item key (minus side of the button) and Value key (minus side).
3. Turn the printer on.
4. Wait for RESET MAINTENANCE COUNT to be displayed and then release both keys.

NOTE: Some versions of the 4000, 4050, 4100, and 5000 will NOT have their maintenance count reset by following the preceding “short cut” method. This is due to the many different formatter board revisions. If the short cut method doesn’t reset the maintenance count then you will need to go service mode to manually reset the maintenance count to zero.

How to Reset the Maintenance Count on HP LaserJet 4100mfp/4101mfp, 4200/4300, 4250/4350 and HP 9000/9040 and 9050!

1. Turn the product off.
2. Turn the product on.
3. Press and hold down the checkmark (Select) button while the memory is counting. The memory starts     counting at 000MB immediately after you turn the power on.
4. Continue to hold down the checkmark (Select) button until all three LEDs are illuminated.
5. Release the checkmark (Select) button.
6. Press the up arrow (Navigation) button until the message New Maintenance Kit appears on the                 control panel display.
7. Press the checkmark button once.

(Note: on LaserJet’s 4200, 4300, 9000 you can hold down the checkmark button as you turn the power on and then wait for the three LEDs to illuminate. On LaserJet’s 4250, 4350 series you need to wait until you turn the power on and the memory starts counting before you hold the checkmark button. A message New Maintenance will appear in the control panel display and the printer will reset.

LaserJet 9000/9040/9050 Fuser Error and Power Supply Failure!

We provide LaserJet 9000/9040/9050 error code 50.1 Low fuser temperature, error 50.2 Fuser warm up, error 50.3 High fuser temperature, error 50.4 Faulty fuser, error 50.5 Inconsistent fuser errror 50.6 Faulty fuser.

LaserJet 9000/9040/9050 fan failure!
LaserJet 9000, 9040 and 9050 printer repair with 57.1 Cartridge fan error (fan #5), error code 57.3 Power-supply-fan error (fan #1), error code 57.4 Formatter- (controller-) fan error (fan #2), error 57.5 Delivery-fan (front) error (fan #4), error 57.6 Face-down tray error, error 57.7 Delivery-fan (back) error (fan #3) and error code 57.8 Duplexer-fan error. All LaserJet 9000/9040/9050 error 59.0 Main motor error, error 59.1 Main motor startup error and error 59.2 indicates Main motor rotation error.