Authorized HP LaserJet 8100mfp Service Error Code Repairs and Laser-jet 8100 MFP Multifunction Printer Repair/service in Los Angeles, Orange County, and San Bernardino!
LaserJet 8100mfp printer repair and maintenance service in Southern California!
We specialize on HP LaserJet 8100mfp printer repair and onsite printer service in Los Angeles and Orange County with image defects, error messages, numerical error codes and maintenance errors. We provide LaserJet 8100MFP repairs with 57 fan error, Error 50, 50.1, 50.2 fuser errors as well as 51.1, 51.2 and 521,52.2 laser scanner errors. Our LaserJet printer service team has the technical ability to provide HP 8150mfp repairs on the first visit.
Every Hewlett Packard LaserJet 8100 multifunction printer repair/service includes free cleaning. We offer 8100mfp repair with image defects and toner not bonding on the paper, smeared prints, dirty prints, repeating images and vertical line due to a bad fuser unit failure. We offer 6 months warranty on every HP laser-jet 8100 mfp printer repair and maintenance service at your site. We carry most common HP 8100mfp repair parts to provide service error code repairs on the first visit.
We carry Genuine LaserJet 8100mfp C4182X toner cartridges to solve print defects with horizontal lines, blotches, repeating dots, mirror image and vertical line due to a bad refurbished toner. We carry Genuine HP 8150 Maintenance Kit C3914A and fuser units. We stock HP 8100 mfp paper input unit and delivery assembly to solve 13.1 and 13.2 error codes.
We stock parts to provide 8100mfp/8100 multifunction printer numerical service error codes 51.1, 51.2 beam detect error , 52.1,52.2 laser scanner error and 50.1, 50.2, 50.3, 50.4 fuser error or bad low voltage power supply failure. Our goal is solve printer maintenance kit and service error codes on the first visit.
Most Common Paper Jam Service Error Code Repairs on HP 8100mfp
Hewlett Packard LaserJet 8100 mfp repair with 13 paper jam error codes!
- HP LaserJet 8100mfp 13.0 paper jam. The printer detects a paper jam immediately after the printer is turned on
- LaserJet 8100 mfp 13.1 errors messages indicate that the paper did not leave Tray 2 or Tray 3.
- Hewlett Packard LaserJet 8100 mfp 13.2 errors indicate that the paper did not reach the sensor located under the toner.
- LaserJet 8100MFP 13.3 error code indicate a crumpled paper under the print cartridge or registration
- Laser Jet 8100 mfp 13.4 error message indicate that the paper did not reach the sensor located in the fuser.
- HP LJ 8000 13.5 error messages indicate that the paper has not reached the upper output bin.
- HP laser 8100MFP 13.6 error code indicate that paper has stopped on the way to the upper output bin.
- Laser Jet 8100mfp 13.7 errors indicate that the paper never reached the first sensor in the duplexer.
- HP 8000 mfp 13.8 error indicate that the paper made it into the duplexer, but stopped or jammed while being flipped.
- 8100 mfp 13.10 errors indicate that the paper has stopped over the last sensor in the duplexer.
- Hewlett Packard 8100mfp 13.11 error messages indicate a problem exists with Tray 4.
- HP 8100MFP 13.12 error messages indicate there is a problem with the Multi-Bin Mailbox.
Clearing the Maintenance Count Service Message on Laser Jet 8100mfp
Resetting the maintenance message/count on HP 8100 mfp/8150 mfp
- Turn the HP 8150 multifunction printer off.
- Then press and hold the left (“-“) side of both the Item and Value keys while powering on.
- Continue holding these keys until the display reads “ Reset Maintenance Count ” (on some printers, it will read “ Count ”), then release them.
- Once the display goes to “Ready,” print a configuration page and check that “Pages Since Last Maintenance” has gone to zero. If not, go to step 2.
Using the Service Manu to Reset the Maintenance Error on Laserjet 8100 Multifunction Printers!
- In some cases (especially if the maintenance kit is installed prematurely – before the “Perform User Maintenance” message comes up), step 1 may not work. In these cases, you will have to go into service mode and directly manipulate the maintenance count:
- Turn the printer off. Then press and hold Select and Cancel Job while powering on. Continue to hold these keys until all display lights are on, then release them.
- Press and release the right side of Menu, then Select. The display will briefly show “Service Mode” and return to this after initializing.
- Go into the Service Menu and set “Maintenance Count” to zero, one digit at a time (Value changes the underlined digit; Select sets that digit and moves to the next one – make sure to select all digits). When finished, press Go twice to exit the service mode. Caution: Do not change the “Maintenance Interval” – in particular, do not set it to zero! This can cause a permanent “49” error and necessitate replacement of the formatter board.
HP LaserJet 8100mfp Replacement Parts List
| HP LASRJET 8100MFP PARTS | PART NUMBER |
|---|---|
| Fixing Assembly/Fuser Unit | RG5-4315/C4214-69007 |
| Maintenance Kit | C3914-67902 |
| Mulit-Purpose Pickup Assembly | RG5-1880-000 |
| Tray 1 Pickup Roller | RB1-9526 |
| Pickup Rollers Tray 2/3) | RF5-2708-000CN |
| Feed Separation Rollers | RF5-1834 / RF5-1426 |
| Low Voltage Power Supply | RG5-4357-040C4265-69006 |
| Delivery Assembly | RG5-1874 |
| Transfer Roller | RF9-1394 |
| Laser Scanner Assembly | C4214-69003/C4214-69003 |
| Formatter PCA | C4107-69001/67901 |
| Paper Pick-up Assembly | RG5-4334-260CN |
| Registration Roller Assembly | RG5-4303-03/RH7-5187 |
| Vertical Transport Unit | C4780-69503 |
| Transfer Roller | RG9-1361 |
| DC Controller | C4214-69009/RG5-4375 |
| Paper Pickup Assembly | C4214-69017 |
| Main Motor | RH7-5219 |
| Control Panel Overlay | C4214-40029 |
| Tray 2 Paper Cassette | RG5-3951 |
| Tray 3 Paper Cassette | R98-1004 |
| Diverter Door Assembly | RB2-3558 |
| Low Voltage Power Supply | RG5-4301-040CN/RG5-4306 |
| Toner Cartridge | C4182X |
| 3000 Sheet Stapler/Stacker | RG5-4301-040CN |
| 2,000 Sheet Input Tray | C4781A |
| Digital Copy Module Stand | C4231A |
| Duplexer/Duplex Unit | C4782-69501 |
